M- 545 |
1. CHARACTERISTICS:
- Inlet and outlet valves for water meters installation. Maximum working pressure of 20 bar (2,0Mpa).
- For a test rate of 0.66 l / s (2.38 m3 / h), the pressure loss is less than 2,5m.c.a. at the entrance.
- Only materials that generate no alteration of the water in the level of quality, appearance, color or taste are used.
- Noise levels always below 50 decibels.
- Our union nuts allows to exchange any type or brand of meter.
2. COMPONENTS Y MATERIALS
- Body, ball, nuts, shafts and other metallic parts manufactured under UNE-EN 12165 y 12164 standard.
- Inner sealing with two NBR O Rings.
- PTFE seats to ensure axial sealing and avoid buildup.
- AISI 304 stainless steel handle / Brass butterfly handle / Brass square handle
- SAME valve body regardless of the type of pipe connection: Male / Female / flange.
- Connections: Female thread ISO 228 / Free nut female threaded ISO 228.
- he assembly of the free nut in the body is performed by a lock washer; the TMM valves ensure greater tightness and resistance to clamping force.
ANGLE / FREE NUT
Size A | Size F | Bore | B (mm) | C (mm) | D (mm) | E (mm) | ||||||
3/4” | 7/8” | Ø19 | 1” | 44 | 45 | 94 | ||||||
3/4” | ||||||||||||
1” |
OPTIONS: In case of applying a different color handle, the first letter of color must be marked at the end of the code. For example: Blue handle 02090 01A.
![]() |
ANGLE INLET VALVES M-545 |